xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
105
DGS-3450:admin# config authentication ports all auth_mode host_based vlanid 1-3 state
enable
Command: config authentication ports all auth_mode host_based vlanid 1-3 state enable
Success.
DGS-3450:admin#
show authentication guest_vlan
Purpose
Used to show guest VLAN setting.
Syntax
show authentication guest_vlan
Description
The show guest VLAN command allows you to show the information of guest VLAN.
Parameters
None.
Restrictions
None.
Example usage:
This example displays the guest VLAN setting:
DGS-3450:admin# show authentication guest_vlan
Command: show authentication guest_vlan
Guest VLAN VID : 1
Guest VLAN Member Ports : 4
Guest VLAN VID : 3
Guest VLAN Member Ports : 1,8
Total Entries: 2
DGS-3450:admin#
show authentication ports
Purpose
Used to display authentication setting on port(s).
Syntax
show authentication ports {<portlist>}
Description
User can use this command to display authentication method and authorization mode on
ports.
Parameters
portlist
- Display compound authentication on specify port(s).
If not specify the port, displays compound authentication setting of all ports.
Restrictions
None.
Example usage:
This example displays authentication setting for all ports:
