xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
199
DGS-3450:admin# show dhcpv6 excluded_address
Command: show dhcpv6 excluded_address
Pool1
Range 1
Begin Address: 2000::2
End Address : 2000::5
Range 2
Begin Address: 2000::8
End Address : 2000::8
Pool name: Pool2
Range 1
Begin Address: 3000::2
End Address : 3000::5
Range 2
Begin Address: 3000::8
End Address : 3000::8
Range 3
Begin Address: 3000::18
End Address : 3000::20
Total Entries : 5
DGS-3450:admin#
config dhcpv6_server ipif
Purpose
This command is used to configure the DHCPv6 Server state per interface
Syntax
config dhcpv6_server ipif <ipif_name 12> state [enable | disable]
Description
This command configures the DHCPv6 Server state on the IP interface.
Parameters
ipif <ipif_name 12>
- The name of the IP interface.
state
- See below:
enable
- Enable the dhcpv6 server state for a specified interface.
disable
- Disable the dhcpv6 server state for a specified interface.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the DHCPv6 Server state of System Interface to enable:
DGS-3450:admin# config dhcpv6_server ipif System state enable
Command: config dhcpv6_server ipif System state enable
Success.
DGS-3450:admin#
debug dhcpv6_server state
Purpose
This command is used to enable or disable DHCPv6 server debug functions.
Syntax
debug dhcpv6_server state [enable | disable]
Description
This command is used to enable or disable DHCPv6 server debug functions.
