xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
401
DGS-3450:admin# config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
DGS-3450:admin#
show mac_notification
Purpose
Used to display the Switch’s MAC address table notification global settings
Syntax
show mac_notification
Description
This command is used to display the Switch’s MAC address table notification global settings.
Parameters
None.
Restrictions
None.
Example usage:
To view the Switch’s MAC address table notification global settings:
DGS-3450:admin# show mac_notification
Command: show mac_notification
Global Mac Notification Settings
State : Enabled
Interval : 1
History Size : 1
DGS-3450:admin#
show mac_notification ports
Purpose
Used to display the Switch’s MAC address table notification status settings
Syntax
show mac_notification ports {<portlist>}
Description
This command is used to display the Switch’s MAC address table notification status settings.
Parameters
<portlist>
– Specify a port or group of ports to be viewed. The beginning and end of the port list
range are separated by a dash. Non-contiguous portlist entries are separated by a comma.
(ex: 1-3,7-9)
Entering this command without the parameter will display the MAC notification table for all
ports.
Restrictions
None.
Example usage:
To display all port’s MAC address table notification status settings:
