xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
251
DGS-3450:admin#disable password_recovery
Command: disable password_recovery
Success.
DGS-3450:admin#
show password_recovery
Purpose
Used to display the password recovery state.
Syntax
show password_recovery
Description
The displayed content includes both the running configuration and the NV-RAM
configuration.
When the password recovery state is enabled, the user can reboot the Switch and enter the
Password Recovery mode. Otherwise, the user will not be able to enter the special recovery
mode.
Note:
Only the NV-RAM configuration will take effect when the Switch restarts, the running
configuration does not take effect until being saved. That means the password recovery is
determined by the state stored in the NV-RAM and takes effect when the Switch starts up the
next time. The Running Configuration is the current configured state of the password
recovery, the configuration is deleted without being saved, or becomes the NV-RAM
configuration when being saved.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To display the password recovery state:
DGS-3450:admin#show password_recovery
Command: show password_recovery
Running Configuration : Enabled
NV-RAM Configuration : Enabled
DGS-3450:admin#