xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
215
DGS-3450:admin# reconfig member_id 2
Command: reconfig member_id 2
DGS-3450:admin#
Login:
config sim_group
Purpose
Used to add candidates and delete members from the SIM group.
Syntax
config sim_group [add <candidate_id 1-100> {<password>} | delete <member_id 1-32>]
Description
This command is used to add candidates and delete members from the SIM group by ID
number.
Parameters
add <candidate_id 1-100> <password>
– Use this parameter to change a candidate switch
(CaS) to a member switch (MS) of a SIM group. The CaS may be defined by its ID number
and a password (if necessary).
delete <member_id 1-32>
– Use this parameter to delete a member switch of a SIM group.
The member switch should be defined by ID number.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To add a member:
DGS-3450:admin# config sim_group add 2
Command: config sim_group add 2
Please wait for ACK!!!
SIM Config Success !!!
Success.
DGS-3450:admin#
To delete a member:
DGS-3450:admin# config sim_group delete 1
Command: config sim_group delete 1
Please wait for ACK!!!
SIM Config Success!!!
Success.
DGS-3450:admin#
config sim
Purpose
Used to configure role parameters for the SIM protocol on the Switch.
Syntax
config sim [[commander {group_name <groupname 64>} | candidate] | dp_interval <sec
30-90> | hold_time <sec 100-255>]
Description
This command is used to configure parameters of switches of the SIM.
Parameters
commander
– Use this parameter to configure the device’s SIM role to commander (CS).
•
group_name <groupname 64>
– Used to update the name of the group. Enter an
