xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
63
config admin local_enable
Purpose
This command is used to configure the local enable password of the administrator level
privilege.
Syntax
config admin local_enable
Description
Configure the local enable password for the enable command. When the user chooses the
“local_enable” method to promote the privilege level, the enable password of the local device
is needed.
When the password information is not specified in the command, the system will prompt the
user to input the password interactively. In this case, the user can only input a plain text
password. If the password is present in the command, the user can select to input the
password in plain text or encrypted form. The encryption algorithm is based on SHA-1.
Parameters
None.
Restrictions
Only Administrator can issue this command.
Example usage:
To configure the administrator password:
DGS-3450:admin# config admin local_enable
Command: config admin local_enable
Enter the old password:
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS-3450:admin#
enable authen_policy_encryption
Purpose
Used to enable the authentication policy encryption.
Syntax
enable authen_policy_encryption
Description
When enabled, and RADIUS key will be in the encrypted form.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the authentication policy encryption:
DGS-3450:admin#enable authen_policy_encryption
Command: enable authen_policy_encryption
Success.
DGS-3450:admin#
disable authen_policy_encryption
Purpose
Used to disable the authentication policy encryption.
Syntax
disable authen_policy_encryption
