xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
526
show sflow
sFlow State:
The current state of the sFlow agent.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To show the sFlow information:
DGS-3450:admin# show sflow
Command: show sflow
sFlow Version : V5
sFlow Address : 10.90.90.90
sFlow AddressV6 : FE80::285:43FF:FE26:3101
sFlow State : Enabled
DGS-3450:admin#
show sflow flow_sampler
Purpose
Used to displaythe the sFlow flow_sampler information of ports which have been created.
Syntax
show sflow flow_sampler
Description
This command is used to show the sFlow flow_sampler configured for ports. The actual value
rate is 256 times the displayed rate value. There are two types of rates. The Configured Rate
is configured by the user. In order to limit the number of packets sent to the CPU when the
rate of traffic to the CPU is high, the sampling rate will be decreased. This is specified as the
active rate.
Parameters
None.
Restrictions
None.
Example usage:
To show the sFlow flow_sampler information of ports which have been created:
DGS-3450:admin# show sflow flow_sampler
Command: show sflow flow_sampler
Port Analyzer Configured Configured Active Active Max Header
Server ID Rx Rate Tx Rate Rx Rate Tx Rate Size
------ --------- ---------- ---------- ------- ------- -----------
10 1 1 2 0 0 20
Total Entries: 1
DGS-3450:admin#
show sflow flow_poller
Purpose
Used to display the sFlow counter_poller information of ports which have been created.
Syntax
show sflow counter_poller
Description
This command is used to show the sFlow counter_pollers which have been configured for
