xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
603
90
U
TILIZATION
C
OMMANDS
The Utilization commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
Parameters
show utilization
[cpu | ports | dram { unit <unit_id>} | flash {unit <unit_id>}
Each command is listed, in detail, in the following sections.
show utilization
Purpose
Used to display real-time port utilization statistics.
Syntax
show utilization [cpu | ports | dram { unit <unitid>}| flash {unit <unitid>}]
Description
The show utilization command displays real-time CPU
，
ports,dram or flash utilization
statistics
Parameters
ports
- Specifies a range of ports to be displayed. (UnitID:port number).
dram
- To show dram memory utilization.
flash
- To show flash memory utilization.
unit
- Specifys the unit to be displayed. If not specified, all units will not be displayed.
Restrictions
None.
Example usage:
To display the ports utilization:
