xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
537
show snmp host
Note: This is SNMPv3 command, if it is used; All SNMPv1/v2 commands are not necessary.
Parameters
<ipaddr>
- The IP address of the recipient for which the traps are targeted.
If no parameter specified, all SNMP hosts will be displayed.
Restrictions
None.
Example usage:
To show SNMP host:
DGS-3450:admin#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version Community Name / SNMPv3 User Name
--------------- --------------- ---------------------------------
10.0.0.1 V1 public
Total Entries: 1
DGS-3450:admin#
show snmp v6host
Purpose
Used to display the recipient for which the traps are targeted.
Syntax
show snmp v6host {<ipv6addr>}
Description
This command is used to display the recipient for which the traps are targeted.
Note: This is SNMPv3 command, if it is used; All SNMPv1/v2 commands are not necessary.
Parameters
<ipaddr>
- Specifies the IPv6 host address.
If no parameter specified, all SNMP hosts will be displayed.
Restrictions
None.
Example usage:
To show SNMP v6host:
DGS-3450:admin#show snmp v6host
Command: show snmp v6host
SNMP Host Table
------------------------------------------------------------------
Host IPv6 Address : 3FFE::51
SNMP Version : V1
Community Name/SNMPv3 User Name : public
Host IPv6 Address : 3FFE::4
SNMP Version : V3 a/np
Community Name/SNMPv3 User Name : user123
Total Entries: 2
DGS-3450:admin#
