xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
457
show port_security
Purpose
This command is to used to display port security configuration.
Syntax
show port_security {ports <portlist>}
Description
The show port_security command displays the port security related information.
Parameters
<portlist>
- Specifies a range of ports to show their configuration.
Restrictions
None.
Example usage:
To display the port security configuration:
DGS-3450:admin# show port_security
Command: show port_security
Port Admin State Max. Learning Addr. Lock Address Mode
----- ----------- ------------------- -----------------
1:1 Disabled 1 DeleteOnReset
1:2 Disabled 1 DeleteOnReset
1:3 Disabled 1 DeleteOnReset
1:4 Disabled 1 DeleteOnReset
1:5 Disabled 1 DeleteOnReset
1:6 Disabled 1 DeleteOnReset
1:7 Disabled 1 DeleteOnReset
1:8 Disabled 1 DeleteOnReset
1:9 Disabled 1 DeleteOnReset
