xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
270
disable qinq
Description
When QinQ is disabled, all dynamic learned L2 address will be cleared, all dynamic
registered VLAN entries will be cleared, and GVRP will be disabled.
If need to run GVRP on the switch, administrator should enable GVRP manually.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To disable qinq:
DGS-3450:admin# disable qinq
Command: disable qinq
Success.
DGS-3450:admin#
show qinq
Purpose
Used to show global QinQ status.
Syntax
show qinq
Description
Use this command to display the global QinQ status.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To show qinq:
DGS-3450:admin#show qinq
Command: show qinq
QinQ Status : Enabled
DGS-3450:admin#
config qinq ports
Purpose
Used to configure QinQ ports parameters.
Syntax
config qinq ports [<portlist> | all] {role [nni | uni] | missdrop [enable | disable] | [outer_
tpid | tpid]<hex 0x1 - 0xffff> | use_inner_priority [enable | disable]}(1)
Description
The command used to configure QinQ port parameters, include:
•
Role of a port.
•
Missdrop of a port.
•
Use inner-priority of a port.
Parameters
ports
- A range of ports to configure.
role
- Port role in QinQ mode
UNI
- Port is connecting to customer network.
