Restoring Your Configuration
Advanced Configuration
301
You can change the default configuration values from the properties file
“/var/apm/apm.properties”.
Restoring Your Configuration
If during a configuration upgrade, the system displays an error or failed
message, you can check the log file
/var/log/conf-V_
[version
number]
log
and decide whether to restore the original configuration.
For example, if you are upgrading your configuration from V_1.2.1 to 1.3.0,
then the log file to check is:
/var/log/conf-V_1.3.0.log
To restore the previous configuration:
restconf config.tgz.old
Table 5-5:
Default Configuration Values from the “apm.properties” File
Property Name
Default
Property
Value
If you change the
default property value,
ensure that . . .
db.apm
apmdb
The system creates a
corresponding database.
db.apm.user
apm
The system creates a
corresponding database
user.
db.apm.pw
apmdb
The system creates a
corresponding database.
db.apm.max_connections
20
“max_connections” in
my.cnf file is set to greater
or equal to
“db.apm.max_connections”
value.
db.apm.min_connections
10
db.apm.host
localhost
the new host is available on
the network.
Summary of Contents for AlterPath Manager 2500
