Cyclades AlterPath Manager 2500 Page 290 Installation, Configuration And User Manual Download

Page: 290 / 368

Working from a CLI

258

APM Installation, Configuration, and User’s Guide

If you are an admin user, you will get a menu that gives you the following
choices:

CLI Commands

A list of commonly used CLI commands for operating the AlterPath Manager
are as follows:

Please choose from one of the following options:

1. CLI

2. Shell Prompt

3. Quit

Option ==>

Table 5-1:

CLI Specific Commands

Command

Use this command to:

man list

List the available commands.

man <command name>

Get a definition of and syntax help for a
command.

consolelist

List all consoles allocated to you as defined in
the access control list. This command also lists
the devices in your ACL.

console <console name>
or
console <device name>

Connect to the specified console or device.

page <console name>

Display the content of the data buffer file for
the specified console.

searchlog

Search the data log files for alarms.

Summary of Contents for AlterPath Manager 2500

















































































































































































































































































































































































Search results

Summary of Contents for AlterPath Manager 2500

Reviews:

Related manuals for AlterPath Manager 2500

Brands by name

Popular brands

Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual

Search results

Summary of Contents for AlterPath Manager 2500

Reviews:

Related manuals for AlterPath Manager 2500

Brands by name

Popular brands