manualshive.com logo in svg

Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual, Page: 230 / 368

Share
Download
Cyclades AlterPath Manager 2500 Installation, Configuration And User Manual Download Page 230

Firmware

 

198

APM Installation, Configuration, and User’s Guide

Figure 4-58:

 Firmware List Form

For an explanation of each form field, refer to Table 4-28 on page 200

.

T

To Add Firmware

Note:

Firmware files (.tgz) are normally downloaded from the web and 

copied into the AlterPath Manager via Secure Copy (SCP). To add or import 
new firmware, follow this procedure: 

1.

From the web (www.cyclades.com), download the firmware to your 
computer.

2.

Using the Linux shell on the serial console interface, use the SSH 

scp

 

command to copy the firmware to AlterPath Manager.

Example:

 

scp v214.tgz root@<ip_address>:/usr/fw

3.

Open the Firmware List form and click the “Import” button.

The system will add the new firmware to the Firmware List form. The 
system also updates the “Firmware/Boot” pull-down list in the Device 
Details form. 

Summary of Contents for AlterPath Manager 2500

















































































































































































































































































































































































Reviews:

No comments