manualshive.com logo in svg

Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual, Page: 93 / 368

Share
Download
Cyclades AlterPath Manager 2500 Installation, Configuration And User Manual Download Page 93

Web Access for Users

Web Access

61

Caution:

Be sure to turn off your web browser’s popup blocker before 
attempting to make an RDP connection. An RDP connection will 
fail if you have your browser’s  popup blocker turned on.

T

To View the Consoles Notify Form

The Consoles Notify form shows the users who are notified when an alarm 
pertaining to the current console is generated.

To view the Consoles Notify form: 

1.

From the Consoles Detail form, click on the “Notify” tab.

The system displays the Consoles Notify form: 

Figure 3-11:

Consoles Notify Form

In the selection box, a plus (+) sign indicates a group, as opposed to a user. 
USER is the default list which contains all users. 

Back 

Button to return to the previous page or form.

Table 3-5: 

Consoles, Details Form

Field

Meaning

Summary of Contents for AlterPath Manager 2500

















































































































































































































































































































































































Reviews:

No comments