manualshive.com logo in svg

Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual

The Cyclades AlterPath Manager 2500 is a state-of-the-art network management system that guarantees seamless installation and configuration for smooth network operations. Make the most of this exceptional product by downloading its comprehensive "Installation, Configuration, and User Manual" for free from our website.

Share
Download
background image

System Recovery Guidelines

Configuration and Administration

203

Backup and Restore Scenarios

For illustration purposes, there are two scenarios in which you can perform 
the backup.

•

Replicating data to a hot spare machine - You back up the configuration 
data and data buffers and restore them to a second AlterPath Manager 
unit. This method enables you to keep the network identity of each 
AlterPath Manager unit, but maintain the same configuration for both 
units. The second unit serves as a spare system. 

•

Replacing the existing AlterPath Manager - You back up ALL data to an 
external server. The AlterPath Manager is then replaced with a new unit 
to which all data is restored. The new unit will have the same 
configuration as the original unit.

To use the Backup and Restore commands in the serial console interface, 
please refer to Chapter 5, “Advanced Configuration

.”

 

System Recovery Guidelines

In the event that the AlterPath Manager goes down, the system will check the 
integrity of the file system during the restart. If a problem is found, then the 
system will attempt to repair any damage that may have occurred.

When performing a recovery procedure, if there is too much damage, you 
have the option to stop the booting process and take recovery actions through 
the serial console as follows:

1.

Rebuild system partition

2.

Rebuild database

3.

Rebuild data log partition

The rest of the configuration process is done through the GUI/web interface.

If the AlterPath Manager goes down, you will still have direct access to ports 
and consoles, but you will need to redefine the devices. 

Summary of Contents for AlterPath Manager 2500

















































































































































































































































































































































































Reviews:

No comments

Related manuals for AlterPath Manager 2500

TDC Netopia User Manual preview
Netopia
Brand: TDC Pages: 27
Lanpro LP-N24 Installation Instructions preview
LP-N24
Brand: Lanpro Pages: 5
D3 DesignCore RVP-TDA3 Series Quick Start Manual preview
DesignCore RVP-TDA3 Series
Brand: D3 Pages: 34
WAGO 750-459 Manual preview
750-459
Brand: WAGO Pages: 48
Hama 00176547 Operating Instruction preview
00176547
Brand: Hama Pages: 25
Infoblox Infoblox-250 Installation Manual preview
Infoblox-250
Brand: Infoblox Pages: 16
Paradyne ACCULINK 3161 CSU Quick Reference Manual preview
ACCULINK 3161 CSU
Brand: Paradyne Pages: 19
SafeHome NVR903 Manual preview
NVR903
Brand: SafeHome Pages: 24
Extron electronics VERSATOOLS MTP User Manual preview
VERSATOOLS MTP
Brand: Extron electronics Pages: 19
Netequalizer NE3000-10 Quick Start Manual preview
NE3000-10
Brand: Netequalizer Pages: 14
Ceragon Fibe-Air IP-10G Installation Manual preview
Fibe-Air IP-10G
Brand: Ceragon Pages: 71
Enterasys GPIM-08 Reference Sheet preview
GPIM-08
Brand: Enterasys Pages: 2
ADTRAN 1202880E1 Quick Start Manual preview
1202880E1
Brand: ADTRAN Pages: 4
Network Instruments WAN Probe Kit Installation & Quick Start Manual preview
WAN Probe Kit
Brand: Network Instruments Pages: 44
National Instruments NI ELVIS III Getting Started preview
NI ELVIS III
Brand: National Instruments Pages: 37
Generic IP ROUTER User Manual preview
IP ROUTER
Brand: Generic Pages: 51
AvaLAN AW5802mTR-EVAL User Manual preview
AW5802mTR-EVAL
Brand: AvaLAN Pages: 13
Bolide BN-NVR/32NX User Manual preview
BN-NVR/32NX
Brand: Bolide Pages: 80

Brands by name

Popular brands

Load more brands