Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual

Page: 269 / 368

Power Management Support
Configuration and Administration 237
Outlets Tab that opens the outlets control form. From here, you
can select individual outlets, regardless of whether or
not they are assigned to a KVM port, and turn them on
or off, cycle them, or lock or unlock them, either
individually, or in selected groups. You can also view
the current status of each outlet from this form after
clicking on the “Get Information” button. This tab does
not appear when you are creating a PM device.
Device Name A name you can give to the PM device to help you
remember where it is and what it controls.
Type Fixed at “IPDU”
Vendor Fixed at Cyclades
Model The model and output current capacity of the PM
device.
Connection A pull-down list allowing you to select either “ssh,”
“ssh_telnet,” or “telnet.”
Status A pull-down list allowing you to select either “On
Demand” (to enable the PM) or “Disabled.”
Connected to: The name of the controlling device (KVM/net, OnSite,
ACS, or TS) to which the PM device is connected.
Port This is either port “1” (or an incriminated number for
each daisy chained device) on a KVM/net or OnSite, or
the serial port number of an ACS or a TS to which the
PM device is connected.
Alarm threshold If set to 0, the alarm will occur when default current
threshold of the PM is exceeded. You can set this to an
alternate threshold below the default threshold, if you
wish.
Over current
protection If selected, automatically shuts off an outlet if the
current at that outlet exceeds the current limit.
Table 4-43: IPDU Device Details
Element Definition