Cyclades AlterPath Manager 2500 Installation, Configuration And User Manual Download Page 151

Page: 151 / 368

Devices

Configuration and Administration

119

Call back connections are included in the log messages.

Note:

For dial back to work, you must configure it from the web interface

and the CLI.

To Configure Dial Up / Dial Back

Note:

Modems are currently supported on the APM E2000 only.

To configure Dial Up or Dial Back, follow the steps below:

Go to Devices > Dial Up.

The system displays the Device Dial Up form.

Figure 4-12:

Device Dial Up Form

Summary of Contents for AlterPath Manager 2500

















































































































































































































































































































































































Search results

Summary of Contents for AlterPath Manager 2500

Reviews:

Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual, Page: 151 / 368

Search results

Summary of Contents for AlterPath Manager 2500

Reviews: