Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual, Page: 262 / 368

Security Rules
230 APM Installation, Configuration, and User’s Guide
3. Click on the “Save” button.
Warning: If the domain name server is down or is not configured correctly,
users with security rules that have host/domainname filtering with
deny permission will still be denied access to the APM because
the security rule can not be verified. If the rule is “Allow” the rule
is ignored and the next “allow” rule is considered.
All successful DNS reverse lookup entries are cached for about 30
minutes, and all unsuccessful DNS reverse lookup entries are
Start IP The starting IP address of a range of IP
addresses.
End IP The ending IP address of a range of IP
addresses.
Hostname Hostname of the workstation. If the
domainname is not entered, then the
domainname of the APM is used to filter the
source.
Domain Domain name on which the workstation will
connect from. If the workstation belongs to
subdomain and only domain filtering is
entered, all sub domains are allowed or denied
access based on the rule permission.
Add Button to add to the conditions list the address,
address range, or hostname/domainname you
just entered in the IP or Netmask field.
Delete Button to delete a selected IP address, address
range, or hostname/domainname from the
adjacent Source IP Conditions list box.
Back Button to return to the previous page.
Save Button to save your configuration.
Table 4-39: Security Rules, Source IP
Element Function