Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual

Page: 305 / 368

Working from a CLI
Advanced Configuration 273
setntp - Set Network Time ProtSocol Server
setserial - Examine the Serial Port Parameters
setsmtp - Set the Email Server’s IP Address.
date - Set the Date and Time
Note: Date format is: [MMDDhhmm[[CC]YY].SS]
Changing the Escape Sequence
There are two ways to change the escape sequence:
• Locally: From the console session, use option ^Ece (refer to the table of
help above for '
e ') to change the escape sequence. It applies only to the
current console session. Once you log off, the escape sequence is deleted.
• Globally: Change file
/var/apm/bin/con
as below. To make it
permanent, you must include this file in
/etc/files.list
and then run
saveconf
.
#original line in /var/apm/bin/con
exec /var/apm/bin/console -Mlocalhost -l$USR $1
[root@APM-gregg root]# setntp
Enter the NTP server: 192.168.48.164
*** Configuration changed!
*** Execute saveconf to save the new values in flash.
[root@APM-gregg root]# setserial /dev/ttyS0
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
[root@APM-gregg root]# setsmtp
Enter the email (SMTP) server: smtp.<your_domain.com
*** Configuration changed!
*** Execute saveconf to save the new values in flash.
[root@APM-gregg root]# date
083122552005
Wed Aug 31 22:55:00 PDT 2005