manualshive.com logo in svg

Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual, Page: 242 / 368

Share
Download
Cyclades AlterPath Manager 2500 Installation, Configuration And User Manual Download Page 242

Blade Management Module

 

210

APM Installation, Configuration, and User’s Guide

more detailed information about the BladeManager web interface in Access 
Mode. 

Devices

The Devices List form allows you to perform the following:

•

Connect to the Blade Management Module Web GUI through a web 
proxy of the native web interface or by telnet access (or whatever default 
session type is configured from the Devices Detail form). 

•

Access add/edit forms (Details, Groups, Proxies, Switch 1 through 4) to 
add/edit chassis. 

•

Delete a blade chassis.

•

Run the Blade Wizard (to automatically create and configure the blades/
switches for the currently selected chassis.

•

View chassis access log. 

T

To Add or Edit the Chassis

1.

From the menu, select “Devices.”

The system displays the Devices List form. 

2.

Perform one of the following steps:

a.

If you are adding a new chassis, from the Devices List form, select 
the “Add” button. 

The Select Device Type form appears; from this form, select “IBM 
Blade Center.”

b.

If you are editing an existing chassis, from the Device List form, 
select the chassis you want to edit, and then click on the “edit” link 
that corresponds with the Blade chassis you are editing.

Summary of Contents for AlterPath Manager 2500

















































































































































































































































































































































































Reviews:

No comments