Cyclades AlterPath Manager 2500 Installation, Configuration And User Manual Download Page 324

Page: 324 / 368

Active Directory (with LDAP)

292

APM Installation, Configuration, and User’s Guide

ktadd -k /etc/krb5.keytab host/apm.somedomain

ktadd -k /etc/krb5.keytab nestor

ktadd -k /etc/krb5.keytab guest

If the desirable principal was not yet added to the Kerberos database, they
should be added with addprinc command before executing ktadd.

For example:

addprinc -randkey host/apm.somedomain

addprinc nestor

addprinc guest

Active Directory (with LDAP)

To Configure Active Directory

Note:

This procedure can either be invoked through the First Time

Configuration Wizard, or from the “

setauth

” command.

Choose the “

active_directory

” authentication method at the

following prompt:

(local/radius//ldap/kerberos/nis/active_directory)

[local]:

active_directory

Enter the Active Directory server:

<authserver>

Enter the distinguished name of the search base:

(ex: 'dc=cyclades,dc=com'):

dc=<first_part_domain_name>,dc=<second_part_domain_name>

Note:

The second part of the domain name is usually “.com,” “.net,” “.org,”

etc.

Enter the common name to bind to the server:

(ex: 'cn=Administrator,cn=Users,dc=cyclades,dc=com'):

<user>@<authserver>

Enter the password to bind with:

Summary of Contents for AlterPath Manager 2500

















































































































































































































































































































































































Search results

Summary of Contents for AlterPath Manager 2500

Reviews:

Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual, Page: 324 / 368

Search results

Summary of Contents for AlterPath Manager 2500

Reviews: