manualshive.com logo in svg

Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual

The Cyclades AlterPath Manager 2500 is a state-of-the-art network management system that guarantees seamless installation and configuration for smooth network operations. Make the most of this exceptional product by downloading its comprehensive "Installation, Configuration, and User Manual" for free from our website.

Share
Download
background image

Devices

 

128

APM Installation, Configuration, and User’s Guide

The example below shows the Device Detail form for the device type, IPMI. 
The device configuration for IPMI is actually the configuration for the IPMI 
Baseboard Management Controller (BMC) that is embedded in the system. 

The input fields and buttons for this form are also similar to the other Device 
Detail forms with the exception of the following:   

When you configure an IPMI device, the AlterPath Manager will allow you to 
create one console which uses the device name as a root and adds “_01”. 
There are two ways you can create this console:

•

From the current IPMI Device Detail form. 

•

From the Console Detail form. 

T

To Use the IPMI Device Detail Form to Add a Console

1.

Open the IPMI Device Detail form (Devices: Device List > Device 
Detail).   

2.

From the IPMI Device Detail form, click on the “Save/Create Console” 
button.

The system launches the Console Wizard.

Table 4-8: 

Devices, Details Form (IPMI)

Element

Definition

Authentication 
Information

Dropdown box to select the authentication 
type. 

Encryption Required

Dropdown box to select the encryption type.

Group Membership

The groupname to which the device belongs. 

Power Control Enabled

(Y/N) to enable/disable power control.

Power On

Button to switch on the IPMI server.

Power Off

Button to switch off the IPMI server. 

Display Sensors/Log

Button to display a new form that contains two 
tabs for viewing sensors or logs from the 
BMC, respectively. 

Summary of Contents for AlterPath Manager 2500

















































































































































































































































































































































































Reviews:

No comments

Related manuals for AlterPath Manager 2500

D-Linke DHP-346AV Quick Installation Manual preview
DHP-346AV
Brand: D-Linke Pages: 32
GE MDS 4710M Setup Manual preview
MDS 4710M
Brand: GE Pages: 6
ICP DAS USA ET-7000 series Quick Start Manual preview
ET-7000 series
Brand: ICP DAS USA Pages: 14
ICP DAS USA I-2533 User Manual preview
I-2533
Brand: ICP DAS USA Pages: 25
ICP DAS USA ET-2200 Series Manual preview
ET-2200 Series
Brand: ICP DAS USA Pages: 15
ICP ZT-2550 Quick Start Manual preview
ZT-2550
Brand: ICP Pages: 14
D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Manual preview
AirPlus XtremeG Ethernet-to-Wireless Bridge...
Brand: D-Link Pages: 31
Paradyne COMSPHERE 3610 User Manual preview
COMSPHERE 3610
Brand: Paradyne Pages: 112
Cambium Networks PMP 450 Series User Manual preview
PMP 450 Series
Brand: Cambium Networks Pages: 215
NETGEAR RAXE500 User Manual preview
RAXE500
Brand: NETGEAR Pages: 169
Direct IP IDIS DR-1304P Operation Manual preview
IDIS DR-1304P
Brand: Direct IP Pages: 76
Dahua DHI-NVR2104-P-4KS2 Quick Start Manual preview
DHI-NVR2104-P-4KS2
Brand: Dahua Pages: 23
Parker PCH1 T P Series User Manual preview
PCH1 T P Series
Brand: Parker Pages: 107
QNAP TS-1283XU-RP User Manual preview
TS-1283XU-RP
Brand: QNAP Pages: 54
ICP DAS USA USB-87P1 User Manual preview
USB-87P1
Brand: ICP DAS USA Pages: 62
Eaton 9479-ETG-CSL Instruction Manual preview
9479-ETG-CSL
Brand: Eaton Pages: 32
Altronix NetWay8GL Installation Manual preview
NetWay8GL
Brand: Altronix Pages: 8
Multitech ROUTE FINDER RFIPSC-1 Quick Start Manual preview
ROUTE FINDER RFIPSC-1
Brand: Multitech Pages: 54

Brands by name

Popular brands

Load more brands