Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual

Page: 307 / 368

Working from a CLI
Advanced Configuration 275
2. Locate the line and edit as follows:
Terminal.buffer = [number of lines]
3. Type in
saveconf
to save your configuration.
4. Close and reopen the applet window to make the change effective.
T
To Change the Session Timeout
The default session timeout value is 60 minutes. To change this value, follow
the steps below:
1. Edit the file:
/opt/tomcat/apm/WEB-INF/web.xml
2. Locate and edit the line:
<session-timeout>60</session-timeout>
3. To make the change effective, reboot or restart tomcat as follows:
/etc/init.d/tomcat stop
/etc/init.d/tomcat start
T
To Change the Number of Consoles per Page
The default number of consoles that you can view from the Consoles List
form is set to 512. Edit the
/var/apm/apm.properties
file.
4. Go to the
apm.consolesperpage=512
line.
5. Change the “512” in the line to the value desired.
T
To Enable Telnet
Telnet is available in the AlterPath Manager, but disabled by default to avoid
security problems. To enable Telnet, follow the steps below:
1. Edit
/etc/services and
add the following line:
telnet 23/udp
2. Select either step a below to enable the PAM version of telnet or select
step b below to enable the Kerberized version of telnet. Do not enable
both.