Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual

Page: 306 / 368

Working from a CLI
274 APM Installation, Configuration, and User’s Guide
#modify this line to have -e <escape seq>.
Note: In this example esc seq= ^Az
exec /var/apm/bin/console -Mlocalhost -e^Az -l$USR $1
The result of this change in the console session is as follows:
[arnaldo@hp arnaldo]$
[arnaldo@hp arnaldo]$ ssh -ladmin:acs8_02 192.168.47.86
Password:
Console on-demand, please wait...
[Enter `^Az?' for help]
[Enter `^Az.' to disconnect]
Re-defining the Interrupt Key
The key sequence Ctrl+c in the file
/var/apm/bin/apmrun.sh
has been
changed to Ctrl+Shift+hyphen (that is: ^_) to prevent the system from
directing this command to any application running on the foreground rather
than to the console server. Unlike ^c, the latter is not a valid key combination
for most servers including Sun, and should enable you to interrupt the console
server as necessary.
If, however, you need to re-define the command, you may do so from the
/var/apm/bin/apmrun.sh
file, below the commented line shown:
# Redefine CTRL+C here. Customize it as you wish.
stty intr ^_
T
To Change the Number of Lines in the SSH
Applet
Note: By default, the number of lines used by the memory buffer when a
user scrolls the window is set to 1000 lines (Terminal buffer = 1000). You
may change this value to suit your needs. Be aware, however, that specifying
values greater than 1000 can degrade scroll performance.
1. Edit the file:
/opt/tomcat/apm/applet.conf