manualshive.com logo in svg

Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual

Share
Download
Cyclades AlterPath Manager 2500 Installation, Configuration And User Manual Download Page 146

Devices

 

114

APM Installation, Configuration, and User’s Guide

5.

Click on the “Save” button when done.

6.

Select “Devices” from the main menu panel to return to the Device List 
form and verify your entry. 

Note:

For Health Monitoring to work with alarms, you must create the alarm 

triggers. See “Configuring Alarms for Device Health Monitoring” on page 
160. 

The Device detail form for TS is similar to that of the ACS. The Model 
dropdown box provides you with a list of TS models to select from. 

Firmware/Boot

Dropdown list to select any firmware or 
bootcode to upload. You select the firmware 
to upload, and then when you upload the 
configuration for the device, you can select 
the checkbox to upload the firmware as well. 
Available on KVM/net, KVM/net Plus, ACS, 
and TS.

Note:

If you upload the firmware to a KVM/

net currently running FW version 2.0.0 or 
earlier, you must configure  the “Admin 
Name” for the device as “root”.  

Back

Button to return to the previous page. 

Reset

Button to reset the form. 

Save

Button to save all Device configuration 
entered in this form. 

Save & Create 
Consoles

Button to initiate the Console Wizard and 
save the resulting settings.

Save & Auto Discover

Button to initiate the Device Discovery 
Wizard and save the resulting settings for the 
ACS, TS, or KVM/net. 

Table 4-3: 

Devices, Detail Form

Element

Definition

Summary of Contents for AlterPath Manager 2500

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands