Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual

Page: 317 / 368

Configuring Dial Out and Dial Back
Advanced Configuration 285
T
To Define Different Scripts for Each tty
Device
The modem chat scripts are located in “/etc/ppp”, and are used by “pppd” to
initialize the modem and to dial out.
The file, “/etc/ppp/chat-init” is the default script used for modem initialization
and “/etc/ppp/chat-connect” is the default script for modem dial out.
1. To define an init script for a specific port, copy “/etc/ppp/chat-init” as
“/etc/ppp/chat-init-<tty device>”.
Where: < tty device > is the port where you want to apply the script.
For example, if “/etc/ppp/chat-init-ttyPS0” is present, then the system
uses this file instead of “/etc/ppp/chat-init” to initialize ttyPS0.
2. To define a connect script for a specific port, copy “/etc/ppp/chat-
connect” as: “/etc/ppp/chat-connect-<tty device>”.
For example, if “/etc/ppp/chat-connect-ttyPS0” is present, then the
system uses this file instead of “/etc/ppp/chat-connect” to dial out through
ttyPS0.
3. Add the new file names in “/etc/files.list”
4. Enter
saveconf
to save your configuration.
Configuring Dial Out and Dial Back
To enable device or console access through dial out or dial back, you must
configure the following:
Note: For a complete list of all configuration requirements for Dial Out and
Dial Back, see “Dial Up and Dial Back” on page 118, Chapter 4: AlterPath
Manager Web Administration.
For ACS Devices:
Using CLI, create a new user and password from the ACS using the
commands:
• adduser <ppp_user>
• passwd <ppp_user>