manualshive.com logo in svg

Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual

The Cyclades AlterPath Manager 2500 is a state-of-the-art network management system that guarantees seamless installation and configuration for smooth network operations. Make the most of this exceptional product by downloading its comprehensive "Installation, Configuration, and User Manual" for free from our website.

Share
Download
background image

Key Features

10

APM Installation, Configuration, and User’s Guide

Ethernet Bonding

Ethernet bonding is a method of providing redundancy to an Ethernet 
connection. When Ethernet bonding is enabled, the primary Ethernet port 
operates under normal circumstances. If the primary Ethernet port fails, a 
backup (or redundant) Ethernet port takes over. This is called a failover 
condition (e.g., the primary Ethernet port fails over to the secondary Ethernet 
port). A different interface becomes active if, and only if the active interface 
fails. After a failover has occurred, the primary interface becomes active once 
again after the failover condition has been corrected. 

Note:

Ethernet bonding cannot be implemented on an APM 2500 or an APM 

5000 in a private network configuration, since the APM 2500 and the APM 
5000 will not support expansion cards.

DHCP Option for APM Network Setup

When you configure the network, either through the First Time Configuration 
Wizard, or through the CLI “setnetwork” command, you now have the option 
to use DHCP (Dynamic Host Configuration Protocol) to configure Eth0. 
DHCP allows the APM to obtain its own IP address from the DNS server. If 
there is no DNS server, or if the DNS server cannot be accessed, the default IP 
address of 192.168.1.20 will be assigned to Eth0. Eth0 is the only Ethernet 
port that can be configured to use DHCP. Of course, as always, you can 
configure Eth0 with a static IP address, if you wish.

Health Monitoring

This feature allows the AlterPath Manager to monitor on a periodic basis the 
consoles that are running on specified device, to generate log files, and to 
send an alarm notifications to specified users. 

Health Monitoring is designed to ensure that in the event of a network failure, 
remote sites are available and working properly. 

An integral part of Health Monitoring is the Health Modem feature which 
monitors any modems that are being used to connect to a device either as a 
primary connection or as a backup. Like Health Monitoring, this feature has 
its own alarm trigger which the administrator can configure to generate log 
files and send alarm notifications to users.

Summary of Contents for AlterPath Manager 2500

















































































































































































































































































































































































Reviews:

No comments

Related manuals for AlterPath Manager 2500

National Instruments NI 9265 Operating Instructions Manual preview
NI 9265
Brand: National Instruments Pages: 26
National Instruments NI 9203 User Manual And Specifications preview
NI 9203
Brand: National Instruments Pages: 85
National Instruments Module SCXI-1503 User Manual preview
Module SCXI-1503
Brand: National Instruments Pages: 79
National Instruments SCXI-1121 User Manual preview
SCXI-1121
Brand: National Instruments Pages: 162
National Instruments NI 9229 Operating Instructions Manual preview
NI 9229
Brand: National Instruments Pages: 34
D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network... User Manual preview
DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network...
Brand: D-Link Pages: 53
Garland EdgeLens INT10G8LR56 User Manual preview
EdgeLens INT10G8LR56
Brand: Garland Pages: 30
Net to Net Technologies UIM-1000T Installation Instructions preview
UIM-1000T
Brand: Net to Net Technologies Pages: 4
Keithley 7011-C Instruction Manual preview
7011-C
Brand: Keithley Pages: 98
Ruckus Wireless MediaFlex NG Quick Installation Manual preview
MediaFlex NG
Brand: Ruckus Wireless Pages: 2
Rosewill RNX-N150RT Quick Installation Manual preview
RNX-N150RT
Brand: Rosewill Pages: 10
Buffalo LinkStation Mini User Manual preview
LinkStation Mini
Brand: Buffalo Pages: 71
M86 Security M86 Web Filter User Manual preview
M86 Web Filter
Brand: M86 Security Pages: 309
Teletronics International TT 900 User Manual preview
TT 900
Brand: Teletronics International Pages: 57
LevelOne NetCon FBR-1409TX User Manual preview
NetCon FBR-1409TX
Brand: LevelOne Pages: 88
Alfa Network AC1200R Setup Manual preview
AC1200R
Brand: Alfa Network Pages: 11
Avocent Cyclades CS4008 Specifications preview
Cyclades CS4008
Brand: Avocent Pages: 2
Edgewater Networks EdgeMarc 4300T Installation Manual preview
EdgeMarc 4300T
Brand: Edgewater Networks Pages: 23

Brands by name

Popular brands

Load more brands