Cyclades AlterPath Manager 2500, Installation, Configuration And User Manual, Page: 292 / 368

Working from a CLI
260 APM Installation, Configuration, and User’s Guide
2. In the “Host Name (or IP address)” field, type the connection parameters
in the following format:
<user name>:<console name>@<IP address of APM>
Figure 5-1 shows a PuTTY configuration window with a sample SSH
configuration setup that uses the APM as a security proxy.
Figure 5-1:
PuTTY Configuration of APM as a Security Proxy
T
To Connect SSH from a Linux or UNIX System
Using SSH on a Linux or UNIX system, type in:
# ssh <user name>:<console name>@<IP address of APM>
This command opens a SSH connection to the AlterPath Manager, checks the
username and password, checks the access control list to verify user access,
and then establishes the connection to the appropriate console. After the
connection is established, you will be prompted to log in to the system
connected to the console port.