106
Choosing Display Units and Conventions
By default, MultiView displays horizontal readings in degrees using the roll and pitch convention. You can choose
different conventions and also different units.
Conventions for Horizontal Inclination
For displaying horizontal inclination, you can choose between the Cartesian roll and pitch convention and the polar
magnitude and direction convention.
•
Cartesian
Roll
and
Pitch
(see figure below) indicate the inclination angle in two dimensions. Assuming you
aligned the WaferSense™ AMS logo as described
above (see page
),
Roll
indicates side-to-side tilt, and
Pitch
indicates front-to-back tilt. If the front edge is higher than the back, or the right edge is higher than the
left, the readings are positive.
Bubble
Go/No-Go circle
