122
Temporarily Changing the Vertical Tolerance and Target
The vertical tolerance and target in effect at the time a log file entry is made are recorded in the log file as part of
the log entry. Those values are used when you first display an entry from the log file. You can temporarily change
vertical tolerance and target for the entry you are currently viewing. However, as soon as you select a new entry
from the log file, the vertical tolerance and target displayed revert to that of the log file entry.
To change the target and tolerance settings:
1)
Choose the menu item
Settings > Set Vertical Tolerance
.
2)
The Set Vertical Tolerance dialog is displayed, as shown below. The currently set values for both
Tolerance
and
Target
are shown.
3)
Enter the
New vertical tolerance
and
New vertical target values
, and click
OK
.
4)
If you want to return to measuring relative to absolute vertical, change the
Target
setting back to zero.
