48
6)
You can leave the
“
Set Go/No-Go
”
menu open, while using MultiView. Doing so makes it easy to change the
Go/No-Go tolerances. To close the menu, click
OK
.
Setting Options for the No-Go Indicators
To set options for the No-Go indicators:
1)
Choose the menu item
Settings
>
Options
. The options dialog is displayed.
2)
If you want the indicator to remain red for a certain length of time following the event, choose
Keep No-Go
indicator on for
, and choose the number of seconds.
3)
If you want MultiView to alert you with an audible beep when a Go/No-Go condition is exceeded, check
Audio
Beep on No-Go
.
4)
Click
OK
and the No-Go options take effect immediately.
No-Go options, which are described
in more detail below