90
There are two ways to put a call on hold, please see the table below for detailed
descriptions.
To put a call on hold, press~
To resume a call on hold, press~
Method 1.
“
＊
1
” (Hold Call Key combination)
“FlashHook”
Method 2.
“FlashHook”
“FlashHook”
Send #
—
Tick the checkbox to enable this function. And when it is enabled, you have to
dial
“#” after every phone number.
Click
Submit
to apply your settings after you finish configuring this page. Or click
Reset
to clear all
values in this page.
2.10.6 Phone Book
The Residential Gateway supports 2-digit speed dial for the local lines and the SIP phone
numbers that are used frequently. Select
Phone Book
from the
VoIP Management
menu.
Then,
Phone Book
screen page appears as follows.
For details on the settings, please refer to the description of the individual section below.
Phone Book
This section enables you to make settings for the phone book function. So you can
dial the frequently called number by entering this pre-programmed code. And below is a
description of configuration parameters in this section.
Speed Dial
—
This function allows you to dial the frequently called number by entering
pre-programmed codes. The maximum of 10 speed-dial entries can be assigned.