56
URL Filter Rule
Enable or disable the URL filter function. When it is enabled, the Residential
Gateway will drop packets whose destination URL addresses are specified in the URL filter rules.
URL Filter
This section contains a table for the URL filter rules. The URL filter rules will prevent
the hosts on the private network to visit the specified URL addresses on the Internet. You can
create or modify a URL filter rule in the text boxes of the rule table. Below is a description of
configuration parameters in this table.
Enable
—
Select the checkbox if you want to enable this rule.
URL Filter String
—
Specify the URL address which this rule will allow or deny.
Action
—
Click
Insert
to add a new rule to the table after you configure it in the text
boxes. And to modify an entry in the rule table, click
Edit.
Then, click
Change
to submit
the new settings. If you need to remove any entry from this table, click
Del
.
Click
Apply
to submit your settings after you finish configuring this page.
2.6.4 VPN Passthrough
This feature enables the VPN traffic to be transmitted from the private network of the Residential
Gateway to the public network. So the VPN client on the private network can establish a VPN
tunnel to the remote VPN server. Select
VPN pass through
from the
Security
sub menu bar.
Then,
VPN pass through
screen page appears as follows:
For details on the settings, please refer to the description of the individual section below.