65
For details on the settings, please refer to the description of the individual section below.
Port Triggering
Select
Enabled
to activate port triggering feature on the Residential Gateway.
Then, the Residential Gateway will execute the port triggering rules in the rule table below. Or
select the
Disabled
radio button if you want to deactivate this feature. You can modify or create a
port triggering rule in the text boxes according to your preferences. Below is a description of
configuration parameters in this section.
Enabled
—
Select the checkbox if you want to enable this rule.
Application Description
—
Enter a brief description for this entry if you want to.
Protocol
—
Choose
TCP
,
UDP
or
Both
in the pull-down menu as the protocol of the
trigger packets
Trigger Port
—
Enter the destination port number of the trigger packet.
Incoming Port Range
—
Specify the range of destination port numbers of the packets
which are allowed to pass through from the WAN interface to the private network when
trigger packets are detected.
Action
—
Click
Apply
to submit the settings after you finish configuring a rule in the text
boxes.
To modify an entry in the rule table, you can select
Edit
in the last
column of the rule table to
modify the entry in the text boxes. Or you can click
Reset
below the rule table to clear all the
values in the text boxes. If you want to remove an entry in the rule table, please select the entry in