53
Source IP Range
—
Specify an IP address range for the LAN filter to block packets
whose source IP addresses are in this range.
Destination IP
—
Specify an IP address range for the LAN filter to block packets whose
destination IP addresses are in this range.
Dest. Port
—
Specify the destination port number of the packets which the LAN Filter will
block.
Protocol
—
Select
TCP
or
UDP
in the pull-down menu as the communication protocol of
the packets which the LAN filter will block.
Schedule
—
Select
Always
for the Residential Gateway to always execute this rule. Or
select
By Schedule
for the Residential Gateway to follow the schedule stipulated in the
Days
and
Time
fields to execute this rule.
Days
—
Select the days on which you want this rule to be executed in a week.
Time
—
Specify a time period of a day in which this rule will be executed.
Actions
—
Click
Insert
to create a new rule which you configure in the text boxes. And if
you want to modify an entry in the rule table, click
Edit
to modify it in the text boxes. Then,
click
Change
to submit the new settings. And if you want to remove an entry in the rule
table, click
Del
.
MAC Filter
This section allows you to edit the rule table for the LAN filter. The LAN filter will
block packets which are received by the Residential Gateway from the private network and match
the pre-determined condition of any entry in the rule table. Below is a description for each column
of this table.
This section allows you to edit the MAC filter rules in the table. The Residential Gateway will drop
packets which match the pre-determined condition of any entry in this table. Below is a description
of each column in this table.