41
Data Rate
—
Select a data rate in the pull-down menu to decide the speed of the
wireless network.
Channel Width
—
Select
20MHz
for the Residential Gateway to support the link
speed of 802.11n mode up to 150Mbps. Or select
40MHz
for the Residential
Gateway to support the link speed of 802.11n mode up to 300Mbps. Note that
40MHz will only operate when the WiFi Channel is 5-11. (
This field is only
available when the network mode is 2.4 GHz (N), 2.4 GHz (G+N), or 2.4 GHz
(B+G+N).
)
Control Sideband
—
The extra bandwidth will be available when the channel
bandwidth is 40MHz. If you select
Upper
, the extra bandwidth will be extended in
the upper sideband. (
This field is only available when the network mode is 2.4
GHz (N), 2.4 GHz (G+N), or 2.4 GHz (B+G+N).
)
Network Name
—
To enable a WLAN of the Residential Gateway, tick the
checkbox of its SSID. And specify the SSID in the text box as the name of the
WLAN. The Residential Gateway provides four WLANs. The WLANs should be
distinguished from each other by their SSIDs. You can find the SSID in the
wireless control panel of the wireless client devices to set up the wireless
connection to the Residential Gateway. And if you do not want the SSID of this
WLAN to be displayed on the wireless control panel of the wireless client devices,
unselect the checkbox for
SSID Broadcast
.
Click
Apply
to submit your changes. Or click
reset
to clear all values in the text
boxes.
WiFi Protected Setup
TM
If you want to set up a wireless network of the Residential Gateway via WPS, please
specify the values of the following parameters.