102
select the first radio button and choose one of the default NTP servers from the pull-
down menu. Or if you prefer a NTP server which is not available in the pull-down menu,
select the second radio button and specify the IP address of the NTP server in the text
box.
Click
Reset
to clear the unsaved values in the text boxes. Or click
Refresh
to update the date and
time of the Residential Gateway. Click
Apply
to submit your settings after you finish configuring
this page. And you can check the time of the Residential Gateway in the
“System Information”
page.
2.14.4 Syslog
Syslog enables the Residential Gateway to send the debug log to the syslog server. Select
Syslog
from the
Administration
sub menu bar, and then
Syslog
screen page will appear as follows.
Syslog Settings
Below is a description of the configuration parameters of this section.
Syslog
—
Tick the checkbox to enable this feature. Or untick the checkbox to deactivate
it.
Syslog Server IP Address
—
Specify the IP address of the Syslog server in the text box.
Syslog Level
—
Select one of the syslog levels from the pull down menu. The
Residential Gateway will record log events at the chosen level and above. For example,
if you choose
Error
,
“error”, “critical”, “alert” and “emergency” events will be recorded.