29
PPPoE Service Name
－
Specify the PPPoE service name provided by your ISP.
PPPoE MTU size
－
Specify the maximal size of the PPPoE packets for optimal
performance.
PPPoE MTU
－
You can change the PPPoE MTU for optimal performance. 1492
is the default MTU.
Attain DNS Automatically
&
Set DNS Manually
－
Choose one of the two
options - Manually or Automatically.
DNS1
－
If you want to choose to set the DNS manually,
please specify the IP
address of the primary DNS server of the WAN interface. (This field is only available
for the data interface. )
DNS2
－
If you want to choose to set the DNS manually,
please specify the IP
address of the secondary DNS server of the WAN interface. (This field is only
available for the data interface.)
DNS3
－
If you want to choose to set the DNS manually,
please specify the IP
address of the tertiary DNS server of the WAN interface. (This field is only available
for the data interface.)
Enable Ping Access
－
Tick the checkbox to allow the WAN interface to reply the ICMP
echo requests which it receives from the public network.
Click
Submit
to apply this change after you finish configuring this WAN interface.
VLAN Settings
This section enables you to assign a PVID and a P-Bit to each port of the
Residential Gateway. And below is a description for the VLAN settings and the VLAN behaviors of
the Residential Gateway.