100
Current State
This section displays the port state of the Residential Gateway. You can click
Edit
in the last column of the table to configure the settings of the selected port in the next section.
Below is a description of the configuration parameters of this section.
Port Configuration
This section allows you to edit the port settings of the Residential Gateway.
Port Number
—
Click the pull-down menu to select the port number for configuration.
Or it will display the port which you select in the section above.
Port State
—
Enable or disable the selected port.
Media Type
—
This field shows the media type (either Fiber or Copper) of the selected
port. And it is open to select when this port is a combo port.
Port Type
—
This is a view-only field. It indicates that the selected port is in the auto-
negotiation mode so this port will negotiate with the other device to link up in the
maximum link speed. And the port of the device on the other side should support auto-
negotiation as well.
Port Speed
—
This field shows the speed of the selected port. And it is open to select
when the selected port is a combo port.
Duplex
—
This is a view only field. It indicates that the selected port is in the full duplex
mode.
Flow Control
—
Enable or disable the flow control function.
Click
Apply
to submit t your settings after you finish configuring this page.