87
Click
Submit
to apply your settings after you finish configuring this page. Or click
Reset
to clear all
values in this page.
2.10.4 FAX Settings
Select
FAX Setting
from the
VoIP Management
sub menu bar.
Then, the following screen page
appears.
For details on the settings, please refer to the description of the individual section below.
FAX Setting
Below is a description of configuration parameters in this section.
Line 1 & 2 T.38 Option
—
Select the T.38 FAX option from the drop-down menu.
T.38 Option
Description
Voice
Voice data will be transmitted in accordance with CODEC
priority defined in
“Voice Setting”.
T.38 FAX Relay
The Residential Gateway will send fax messages as UDP or
TCP/IP packets. This option provides better quality.
However, the peer device must use T.38 as well.
Voice and T.38 Relay
Voice will be transmitted with the defined CODEC priority
and fax messages will be sent with T.38.
Voice and Fax Pass
Through
Voice will be transmitted with the defined CODEC priority
and fax messages will be sent with G.711/Ulaw.
Click
Submit
to apply your settings after you finish configuring this page. Or click
Reset
to clear all