thecrowgroup.com
Page | 54
RF
Parameter
Description
Default Configuration
Starting RF Channel
The PANEL supports up to 5 frequencies to prevent jamming.
You can choose frequency range from 1 to 5.
1
Learn Repeater
Enter the unique ID of the device
Press Done and Save the configuration
-
Delete Repeater
Click this button to delete the selected wireless repeater
-
Time Zones
Settings
Parameter
Description
Default Configuration
Time Zone Start Time
The Time-zone start time is when the time-zone begins. The
time using for arm of area(s), turn output(s) to ON state and
activate rights of specified user(s). There are 8 time-zones
that can be programmed.
Empty
Time Zone End Time
The Time-zone end time is when the time-zone finishes.
The time using for disarm of area(s), tirn output(s) to OFF
state and deactivate rights of specified user(s). There are 8
time-zones that can be programmed.
Empty
Time Zone Day
The Time-zone days are the days of week that the time-
zone will be active. You can select any combination of the
days from Sunday till Saturday. There are 8 time-zones that
can be programmed.
Empty
Holidays
It is possible to pre-program up to 8 holidays. Holidays can
override the time-zone function on the programmed day.
For example, if an output was automatically controlled by
a time- zone, the pre-programmed holidays can stop the
output from turning on or off on a holiday. A holiday
consists of a single day programmed by date. The holiday
begins at the start of the day (00:00:00) and finishes
immediately before midnight (23:59:59) on the
programmed date. Holidays can programmed in any order
(although for simplicity it is recommend that they
programmed in chronological order) and the panel
automatically removes them once the day ends. If you wish
to remove a programmed holiday, you should to clear the
date field.
Empty