thecrowgroup.com
Page | 44
Settings
Parameter
Description
Default Configuration
Channel is active
This option activates or deactivates a report channel for operations.
Channel #8 activated
only
Destination address
Can be up to 7 phone numbers (for channels 1-7 defines as GSM
voice/SMS) or 7 server addresses (for channel 1-7 defined as
TCP-IP/WiFi/GPRS).
The length is up to 32 characters long (digits only for phone
numbers and characters/digits for server address).
No address specified
Protocol
Defines one of the protocol types for each report channel:
•
Crow (crow’s
receiver server is required at the CMS server
)
•
SIA-09(ADM-CID)
•
SIA-09(SIA-DCS)
This option is available only if the specified channel is defined as
TCP/IP, GPRS or Wi-Fi
Crow predefined
Port
Defines report protocol port (up to 5 digits)
4700 predefined (Crow)
Channel Backup
This channel will be activate if the main channel has failed to
open connection or deliver a message.
No channels selected
Failed channel (1-7)
restore time (Min.)
If either channel has failed to deliver messages, it will be
temporarily disable for a period defined by this parameter.
During this time, the corresponding backup channel will be use.
3 minutes
SIA null-event time
(seconds)
The C.P and CMS may be configured to supervise the connection
When supported and enabled, the C.P shall periodically send the
Null Message to the CMS. The supervision interval shall be
configurable over a range of 1 seconds to 900 seconds.
20
Encryption code
The C.P may send an encrypted or an unencrypted Null Message
to permit supervision of the link between the premises and the
central station.
0x32
