thecrowgroup.com
Page | 51
the voice call will continue till remote phone or the originator
will close connection (hangs down).
Wait to Hash Timeout
(seconds)
This is the time period
required to press the Hash key after
answering a call from the control panel / voice device
otherwise the call will be disconnect at the end of this time.
200 (seconds)
Dial timeout ( seconds)
Dial Timeout is the maximum amount of time a dial will wait
for a connect to complete, if there is no connect completed,
a dial will terminated
.
200
Retries panic number
Number of Dial Attempts After a panic event, the dial
attempt will be made only after the end of the Dial timeout
of the previous dial if no one answered the call.
0
Auto answer
If the parameter is set, Automatically answer by the voice device
devices when receiving a call from a phone without accepting a
call by pressing a key in the voice box.
Listen only
If the parameter is set, When receiving a call from a phone, the
voice device will automatically answer the call without a ring or
indicator light and without open the speaker, but only the
microphone will be open for the caller (remote control phone
must be programmed)
TCP/IP
Parameter
Description
Default Configuration
Ethernet Enabled
If this option selected, the Ethernet connection is Enable.
Enable
DHCP Enabled
If this option selected, the DHCP is Enable.
The server will automatically assign an IP address to the control
panel.
Enabled
Static IP
If DHCP is Disable, the control panel must be manually configure
with an IP address, subnet mask, Panel, DNS server.
Empty
Subnet Mask
The network subnet mask for defined static IP address.
Empty
Gateway
IP Address of the router/server.
Empty
DNS Server
The network DNS server address for defined static IP address.
Empty
TCP/IP Port for Remote
Control
The number of incoming TCP/IP port using for remote control
applications.
3064
