thecrowgroup.com
Page | 58
Cannot arm when
communication fault
If this option is selected and the control panel has detected a
communication fault (Ethernet or GSM/GPRS) the panel cannot
be armed.
To reset the failure the line must be re-instated to allow arming
again.
Not selected
Keypad locks for 90 sec
after 5 code attempts
After 5 incorrect codes are entered the keypad will be locked out
for 90 seconds
Enable
Code must be 4-8
digits long
If this option is selected, all user codes, installer code, time zone
passwords and remote access password must be between 4-8
digits long.
If it is not selected, the minimal length of the code is one digit.
Not selected
Enable keypad tamper
if this option is checked the keypad tamper will be enable and
can cause to keypad tamper alarm if keypad removed from the
wall. If this option is OFF, then the keypad tamper will be
disabled, opening or removing the keypad from the wall will not
cause to tamper alarm on panel.
Enable Output Tamper
Monitoring of Tamper alarm indication for any device which is
connected to Control Panel's output.
Selected
Enable panel tamper
if this option is checked the Panel tamper will be enable and can
cause to Panel tamper alarm.
Send picture after
disarm
Continue send picture after disarm
Max report count
The maximum number of log reports from any single source.
The value is limited from 3 to 10.
10
Panel title
This is the name you give to your control panel to identify it
(Ex: Home)
MiniGW
License time
Time period to permit the user control panel and use all activity Not selected
EN Compliance
Enable/Disable EN 50131 Compliance
Not selected
UL Compliance
TBD
Timers And Delays
System Date and Time
Parameter
Description
Default Configuration
Daylight Saving
If you are in Daylight Saving Time when the alarm system is
installed, you MUST turn this option on so that the panel
knows that Daylight Saving Time is currently active. Failure
to do this will not allow the clock to automatically adjust to
the correct time when Daylight Saving Time Ends
Empty
GMT
Time zone starts from Greenwich Mean Time (GMT 0)
2