5
There are three main components to the ALLY UPS System:
(1) MAIN UNIT ASSEMBLY
Main Unit
• The main unit houses the controls of the ALLY Uterine Positioning System.
Power Switch
• The power switch must be ON (green light) in order for the system to work.
Foot Pedal
• Controls the locking and unlocking of the arm.
• Depressing the foot pedal releases the arm to allow for
maneuvering the manipulator.
• Releasing the foot pedal locks the arm and holds the manipulator
in the desired position.
Flexible Arm / Fixed Arm
• Provides desired range-of-motion for positioning the manipulator.
• Holds the manipulator in the desired position.
• Has a mating tip to accommodate engagement with adapter.
ALLY UPS Blue Handle
• This is what is held onto (as well as the blue elbow) when installing
or removing the ALLY UPS from the rail. Refer to Section 7.1 for more information.
Power Cord
• Detachable cord that acts as a disconnect device – supplies power to
the main unit and foot pedal.
(2) ALLY UPS RAIL CLAMP
• Used to mount the ALLY UPS to the patient’s right side rail of
standard operating room tables.
• Secure by tightening the knob.
(3) ADAPTER DRAPE
(sold separately) (Part Numbers AU-AD and AU-AD-DLNTR)
• The adapter drape connects the flexible arm to CooperSurgical manipulators.
• This component is a single-use disposable and comes with drape attached.
• One end of the adapter attaches to the flexible arm via pinch clips.
• The other end of the adapter securely attaches to the manipulator using
the latching mechanism.
• The ALLY UPS’s arm must be completely draped to ensure that the sterile field
is not compromised during the surgical procedure.
• The AU-AD to be used with RUMI and Advincula Arch.
• The AU-AD-DLNTR to be used with the Advincula Delineator
AU-AD
AU-AD-DLNTR
ALLY Uterine Positioning System
®
(ENGLISH)
