Scanner Operation - Panel and Indicators
4-12
Paper Ready LED Flashes Yellow – Scanner in ATAC mode
ATAC key
When you press the ATAC key, you set the scanner in ATAC
mode. The Paper Ready Key flashes yellow to indicate ATAC
mode.
The Paper Forward and Paper Reverse keys become “Pressure-
platen Up” and “Pressure-platen Down” keys.
Paper Forward and Paper reverse Keys become Up/Down keys
Paper Ready LED Yellow - Ready for Thick media
The Paper Ready LED lights yellow when the scanner is ready to
scan thick media. The pressure-platen has been lowered and the
media is positioned correctly in the scanner.
The scanner goes automatically out of ATAC mode. The Paper
Forward and Paper Reverse keys resume their normal functionality
so you can move the thick original forwards and backwards in the
scanner.
Scanning can be controlled from the computer.
Paper Ready LED Flashes – (green or yellow) – Media is being
scanned
The Paper Ready LED blinks during scanning.
On completion of the scan, the Paper Ready LED will stop blinking.
Scanning can then be repeated from the computer or terminated
by ejecting the media from the scanner.
The above behavior applies for both thin media scanning (green
blinking) and thick media scanning (yellow blinking).
Paper Ready LED Red – No Thick media detected
The paper ready indicator will light red if the pressure-platen is in a
thick media setting (a raised pressure-platen) but no media is
detected in the scanner.
Summary of Contents for GS67D
Page 3: ......
