Scanner Operation - Panel and Indicators
4-16
scanner’s central power switch has been turned OFF manually and its clock needs to be
reset.
3. If the scanner is in use then the scanner will delay Sleep mode. Just before automatic Sleep
mode with the timer occurs, the power LED on the panel will flash. You can cancel Sleep
mode by pressing the power button.
4.
Note
that the
Idle time before sleep time
setting will still apply and may conflict with your
Timer
settings. Change the
Idle time before sleep time
setting if it does.
4.9 Idle Time before sleep time
On Scanners:
These scanners support an
Idle time before sleep time
functionality in addition to the
Timer
function described in the previous section. The
Idle time before sleep time
functionality is an
ENERGY STAR
®
compliant feature.
NOTE
: On delivery, your scanner was set to comply with the ENERGY STAR
®
environmental
guidelines with entry into power down mode after being idle for 15 minutes. When you start the
scanner the first time, you are offered the option to change this. If you chose to keep the default
settings at that opportunity, you can at any later time change the settings by following the
instructions below:
To change the Idle time before sleep time (minutes) value…:
1. Double-click on the scanner icon in the system tray to display the WIDEsystem interface.
2. Select
the
Timer
Tab.
3.
Select or Deselect the
Enter Sleep mode automatically
option in the Timer tab dialog.
4. If you selected the option, use the arrows to select the
Idle time before sleep time
value –
the number of minutes the scanner can stand idle before powering down on its own.
5. Press
Apply
to download your settings into the scanner’s memory.
Summary of Contents for GS67D
Page 3: ......
