Maintenance
7-12
8. Reattach the red strip.
9. Close the scanning area lid so the locking mechanism reengages.
NOTE:
Be sure to reset the part replacement warning flag though WIDEsystem’s “Status” tab.
To change the white-background-platen:
Open the lid and locate the red strip on the left side
of the scanner.
Remove the strip and slide out the white background
platen. Reinsert a new platen and replace the strip.
7.4.3 Replacing the Scanner Lamp-Unit
Your scanner comes with a high quality and durable lamp. Even so, its effectiveness will
gradually weaken over time. Some scanner models are designed so users can replace the
lamp. On other models, a service technician must perform this process. See your scanner’s
model specifications to see if the lamp is user-replaceable on your scanner.
A new lamp-unit (lamp, reflector, power connectors) for lamp-replaceable scanner models can
be obtained through your dealer. WIDEsystem monitors scanner usage and will warn you when
it is time for a replacement.
Replacing the Scanner Lamp-unit:
On Scanners:
1.
Turn the scanner power off and disconnect the power plug.
2. The lamp cover is on the left side of the scanner.
3. Place your fingers under the small handle on the bottom of the cover and hold the top
with your thumb.
4. Lift upwards to release the catch and then flip back to remove the cover.
5. You must replace the whole lamp-unit. A lamp-unit consists of a lamp mounted in a
reflector brace and fixed power connectors.
Summary of Contents for GS67D
Page 3: ......
