Installation
3-4
NOTE:
On Windows Compatibility
- Your scanner and drivers are tested and developed to
support the most current active Microsoft Windows version OS systems. Drivers and interface
support in regard to specific Windows versions will follow the Microsoft Support Lifecycle Policy.
The compatibility specifications can therefore change accordingly. The most current OS
compatibility specifications and drivers will be available on your manufacturer’s website.
3.3 Set Up the Scan Station
On All Scanners
Your wide format scanner should be placed either on the specially designed stand-alone floor
stand or on a sturdy table. Make sure there is enough space behind the scanner to allow the
media to run out. Thick stiff media requires space that is at least as large as the media length.
Slots or openings in the cabinet at the back or bottom are provided for ventilation. This
ensures reliable operation of the product and protects it from overheating. These openings must
never be blocked or covered by placing the unit on a bed, sofa, rug, or other similar soft
surface.
Your scanner should never be placed near or over a radiator or heat register.
You should not place the scanner in a built-in installation unless proper ventilation is
provided.
The scanner is equipped with a three-wire (pin) grounding type plug. This plug will fit only
into a grounding-type power outlet. This is a safety feature. If you cannot insert the plug into
your outlet, contact your electrician to replace the outlet and ensure a grounded power
connection. Do not try to defeat or ignore the purpose of the grounding-type plug.
X
Make sure the PC connected to the scanner is likewise power-connected to a grounding-
type power outlet with a three-wire (pin) grounding type plug.
See also the Safety Instructions at the end of this operator’s guide.
Summary of Contents for GS67D
Page 3: ......
